Call 08046046659 95% Response Rate

Send Email

Digital Dyanmometer

Leading Manufacturer of three-point hitch dynamometer, back & leg dynamometer, concrete pull-off tester, pull off tester and bollard pull tester from Jaipur.
Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer
  • Three-Point Hitch Dynamometer

Three-Point Hitch Dynamometer

Product Price: Rs 5.5 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationResearch & Testing
BrandMonad
Display TypeDigital Data Logger
ColorBlack
Product TypeDynamometer
Country of OriginMade in India
Monad Three Point Hitch Dynamometer, are intended for the measurement of Draft Load. This measured Load is further suitable for control tasks. The valid safety regulations should be absolutely respected. The torque sensors are not safety components in the sense of the intended use. The sensors need to be transported and stored appropriately. The assembly, commissioning and disassembling must take place professionally.A three-point hitch accessory was designed and constructed to measure draft, vertical force, and torque simultaneously and independently in a vertical longitudinal plane caused by an implement. Special features of the force dynamometer are dual-loading range and fast-hitching capability. The force dynamometer is designed for tractors in the 75- to 100 kW power range with maximum draft capacity of 66,700 N in the dynamometer's high-range and 36,000 N in the low-range.
Get Best QuoteRequest A Callback
Back & Leg Dynamometer
  • Back & Leg Dynamometer
  • Back & Leg Dynamometer
  • Back & Leg Dynamometer
  • Back & Leg Dynamometer
  • Back & Leg Dynamometer

Back & Leg Dynamometer

Product Price: Rs 1 Lakh / PieceGet Best Price

Product Details:
Type Of InstrumentsBack & Leg Dynamometer
Accuracy+-0.25 Kg or better
Capacity0 to 300 kg.
Power220 V AC & Inbuilt rechargeable battery
Display TypeEasy-to-read LCD display
TemperatureTemperature of 5 Degree to 45 DegreeC & Relative Humidity of 80% or lowe
BrandMonad
FeaturesMeasures strength of back,leg and chest Base provides secure footing Chain length is adjust
Country of OriginMade in India
Digital Back & Leg Dynamometer is Ideal For measuring the strength of the Back, Chest and Leg for routine screening of strength and initial and ongoing evaluation of clients. Monads Digital Back and Leg Dynamometer provides a base for sure footing, a large, easy-to-read LCD screen and an adjustable hand-grip chain to accommodate height differences.
Get Best QuoteRequest A Callback
Concrete Pull-Off Tester
  • Concrete Pull-Off Tester
  • Concrete Pull-Off Tester
  • Concrete Pull-Off Tester

Concrete Pull-Off Tester

Product Price: Rs 2 Lakh / PieceGet Best Price

Product Details:
Usage/ApplicationIndustrial
Display TypeLCD Display
Product TypePull Off Tester
FeaturesPortable Sensor,Easy to use at site # Principle of hydraulic operation that allows preciese adjus
BrandMonad
Country of OriginMade in India
The Monad Concrete pull off tester typically serves for the tensile strength of the Concrete and the resistance to tear of adhesive and surface coatings.
The pull-off test involves applying a direct tensile load to a partial core advanced through the overlay material and into the underlying concrete until failure occurs. The tensile load is applied to the partial core through the use of a metal disk with a pull pin, bonded to the overlay with an epoxy.

A loading device with a reaction frame applies the load to the pull pin. The load is applied at a constant rate, and the ultimate load is recorded.

The surface tensile strength of the concrete is a major feature for the diagnosis status of theexisting buildings. The peel strength is the main characteristics of the products for the repair
of concrete structure damaged and various adhesive and surface coatings such as plaster, plastic plaster, tiles, paints etc.
Get Best QuoteRequest A Callback
Pull Off Tester
  • Pull Off Tester
  • Pull Off Tester
  • Pull Off Tester
  • Pull Off Tester

Pull Off Tester

Product Price: Rs 1 Lakh / PieceGet Best Price

Product Details:
Usage/ApplicationResearch And Testing
Display TypeLCD Display
FeaturesPortable Sensor,Easy to use at site # Principle of hydraulic operation that allows preciese adjus
BrandMonad
Country of OriginMade in India
PrinciplePrinciple of hydraulic operation that allows preciese adjustment the speed of the Load
The Monad Concrete pull off tester typically serves for the tensile strength of the Concrete and the resistance to tear of adhesive and surface coatings.
The pull-off test involves applying a direct tensile load to a partial core advanced through the overlay material and into the underlying concrete until failure occurs. The tensile load is applied to the partial core through the use of a metal disk with a pull pin, bonded to the overlay with an epoxy.
A loading device with a reaction frame applies the load to the pull pin. The load is applied at a constant rate, and the ultimate load is recorded.
The surface tensile strength of the concrete is a major feature for the diagnosis status of the existing buildings. The peel strength is the main characteristics of the products for the repair
of concrete structure damaged and various adhesive and surface coatings such as plaster, plastic plaster, tiles, paints etc.
Get Best QuoteRequest A Callback
Bollard Pull Tester
  • Bollard Pull Tester
  • Bollard Pull Tester
  • Bollard Pull Tester
  • Bollard Pull Tester
  • Bollard Pull Tester

Bollard Pull Tester

Product Price: Rs 47,500.00 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationIndustrial
Capacity1T-1000T
MaterialStainless Steel
Display TypeDigital
Brandmonad
Operating ModeAutomatic
Accuracy+-0.1% of rated capacity
Number Of Load Cells1
Sensor TypeStrain gauge
Country of OriginMade in India
Monad is manufactuinrg wide range of dynamometers for Bollard Pull Testing. Our range includes wireless Tension dynamometers, Line Tensiometers, Rope clamp dynamometer, Tension link Load cells, Shackle Load cells.


Additional Information:

  • Production Capacity: 1000 Nos/year
  • Delivery Time: Ready stock or 2 weeks
  • Packaging Details: Industrial carrying case
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Monad Electronics. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.